邹广德, 张子达, 刘刚, 石沛林, 诸文农. 装载机车架铰接系统铰销强度及铰点附近应力分布的试验研究[J]. 农业工程学报, 1996, 12(1): 127-131.
    引用本文: 邹广德, 张子达, 刘刚, 石沛林, 诸文农. 装载机车架铰接系统铰销强度及铰点附近应力分布的试验研究[J]. 农业工程学报, 1996, 12(1): 127-131.
    shu
    Zou Guangde, Zhang Zida, Liu Gang, Shi Peilin, Zhu Wennong. Experiment and Study on the Pivoted Pin Strength and the Stress Near the Pivot-Point of Articulation System of Wheel Loader[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 1996, 12(1): 127-131.
    Citation: Zou Guangde, Zhang Zida, Liu Gang, Shi Peilin, Zhu Wennong. Experiment and Study on the Pivoted Pin Strength and the Stress Near the Pivot-Point of Articulation System of Wheel Loader[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 1996, 12(1): 127-131.
    shu

    装载机车架铰接系统铰销强度及铰点附近应力分布的试验研究

    Experiment and Study on the Pivoted Pin Strength and the Stress Near the Pivot-Point of Articulation System of Wheel Loader

      摘要
    • 摘要: 将孔内贴有应变片的特制铰销安装在ZL60E装载机铰接系统中,获得了多种工况下的一系列点的应力测试值。将这些值作为试验铰销力学模型修正的依据,建立了力学模型评价的数学方法,寻求更贴近实际作业工况的计算模型。采用该模型即可对装载机实际工作铰销进行有限元分析,从而获得较为可信的计算结果。

       

      Abstract: By putting the strain gauge into the hole-pivoted pin of the articulation system of the wheel loader, the stress values are measured for different working-conditions. Modifying the model of the pivoted pin based on those measured values, a model evaluation is set up to get a reasonable calculation model.

       

      • HTML全文
      • 参考文献(0)
      • 相关文章
      • 施引文献
    • 资源附件(0)

    /

    返回文章
    返回

    邮件订阅 RSS