俞永华, 崔绍荣, 苗香雯, 沈明卫, 沈滨. 华东型连栋塑料温室结构设计[J]. 农业工程学报, 1999, 15(2): 151-154.
    引用本文: 俞永华, 崔绍荣, 苗香雯, 沈明卫, 沈滨. 华东型连栋塑料温室结构设计[J]. 农业工程学报, 1999, 15(2): 151-154.
    Yu Yonghua, Cui Shaorong, Miao Xiangwen, Shen Mingwei, Shen Bin. Structure Design of EastChina Type MultiSpan Plastic Greenhouse[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 1999, 15(2): 151-154.
    Citation: Yu Yonghua, Cui Shaorong, Miao Xiangwen, Shen Mingwei, Shen Bin. Structure Design of EastChina Type MultiSpan Plastic Greenhouse[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 1999, 15(2): 151-154.

    华东型连栋塑料温室结构设计

    Structure Design of EastChina Type MultiSpan Plastic Greenhouse

    • 摘要: 对华东型连栋塑料温室结构设计的特点进行了概括总结。该型温室与进口同类以色列温室相比,具有:①抗雪载性能好;②立柱设计合理;③整体稳定性高;④棚架强度均衡;⑤简化了拉索与方柱的固定结构等优点。经使用表明,该温室的结构设计符合华东地区的气候特点,适应生产要求,造价低。

       

      Abstract: In this paper, the characteristics of structure design of EastChina type plastic greenhouse were summed up. In comparison with multispan plastic greenhouse imported from Israel, it has several advantages: 1)better ability to resist accumulated snowload; 2) more reasonable in pillar design; 3) high stability; 4) balanced in frame strength; 5) simplifying the fixture between the dragging rope and the pillar. The design was conducted in accordance with the climate feature in EastChina region, and the cost was much lower.

       

    /

    返回文章
    返回