棉秆不同组分热解特性及动力学

    Pyrolysis characteristics and dynamics of different components of cotton stalk

    • 摘要: 该文采用耐驰STA449C热重分析仪,氮气气氛下,终止温度为600℃,升温速率为5、10、20、30℃/min,对棉秆、棉皮、木质、棉芯的热解特性进行了研究。TG-DTG曲线反映了4种物质具有相似的热解规律,热解过程分为4个阶段:失水,预热,主热解、炭化。棉皮在棉秆结构成分中灰分含量最高,造成其热解残留物较多。木质、棉芯成分中挥发分较多,其最大失重速率较大。通过积分法Stava和微分法Achar两种方法求解了机理函数,研究表明在转化率α=10%~80%过程中,4种物质的活化能较稳定,棉皮活化能值较高。4种物质最可能机理属于随机成核和随后生长机理,但反应级数存在差异。该研究对棉秆再利用及生物质热解装置的正确设计以及工艺参数优化具有重要的指导意义。

       

      Abstract: The pyrolysis characteristics of stalk, bark, xylem, and pith of cotton were studied by means of STA449c thermo gravimetric apparatus. The process was carried out with heating rates of 5, 10, 20, 30℃/min and final temperature of 600℃ under the atmosphere of nitrogen. TG-DTG curves for these four samples showed that their properties agreed with similar laws of pyrolysis. The pyrolysis of the samples was divided into 4 stages: extraction of water, pre-heating, main pyrolysis and charring. As the ash content of cotton bark was the highest among the different components of cotton, it produced more residues after the pyrolysis process. Xylem and pith of cotton, which were more volatile components, had a larger rate of weight loss. The optimized mechanism and the corresponding function G(α), f(α) were derived from the regression of Stava and Achar. The results showed that when α was 10%-80%, the activation energy of the four substances were relatively stable. However, the activation energies for cotton bark were found relatively higher than the others. The kinetic mechanism of the four substances could be best described by Avrami-Erofeev equations, which belonged to the random nucleation and subsequent growth mechanism. The reaction orders of samples were different according to the experimental results. The study provides a good reference for cotton stalk waste recycling and biomass pyrolysis device design, as well as process parameters optimization.

       

    /

    返回文章
    返回