杨 祯, 王树才. 淋蜡式皮蛋封蜡机的设计与试验[J]. 农业工程学报, 2011, 27(5): 348-352.
    引用本文: 杨 祯, 王树才. 淋蜡式皮蛋封蜡机的设计与试验[J]. 农业工程学报, 2011, 27(5): 348-352.
    Yang Zhen, Wang Shucai. Design and experiment of top-pouring machine for sealing wax on preserved eggs[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2011, 27(5): 348-352.
    Citation: Yang Zhen, Wang Shucai. Design and experiment of top-pouring machine for sealing wax on preserved eggs[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2011, 27(5): 348-352.

    淋蜡式皮蛋封蜡机的设计与试验

    Design and experiment of top-pouring machine for sealing wax on preserved eggs

    • 摘要: 为改善皮蛋手工封蜡质量,降低工人劳动强度和提高生产效率,该文研究了一种皮蛋机械淋蜡式封蜡方法,并根据实际生产要求,研制出一种淋蜡式皮蛋封蜡机。通过工作装置的设计与分析,得出皮蛋蜡膜厚度与液态石蜡温度、皮蛋输送速度紧密相关的结论。涂蜡试验表明皮蛋涂蜡量随蜡液温度的升高而减少,随皮蛋输送速度的加快而增加;根据试验结论和生产要求,淋蜡式皮蛋封蜡机的较优工作参数为淋蜡箱内加热温度105℃,电机运行频率40 Hz,能够达到皮蛋封蜡生产要求,该技术具有很广阔的市场前景。

       

      Abstract: In order to improve the quality of sealing wax by hand, reduce the intensity of labor productivity, a new top-pouring wax technique for preserved eggs was designed. According to the manufacturing standards, a top-pouring machine for sealing wax on preserved eggs was developed. By designing and analyzing the machine, it was proposed that the wax content was closely related to the temperature of liquid paraffin and the speed of conveyor. The top-pouring wax experiment showed the wax content reduced as the temperature went up and increased as the conveyor speeded up. Based on the experiment results and production requirement, the optimal working condition for the machine was that the heating temperature was 105℃ in top-pouring box; motor frequency was up to 40 Hz. It can meet the production requirement.

       

    /

    返回文章
    返回