• EI
    • CSA
    • CABI
    • 卓越期刊
    • CA
    • Scopus
    • CSCD
    • 核心期刊
Wu Guo-shi, Wang Zhi-xuan, Tian Hua. Calculation of Presetting Angle in Torsion Bar Spring[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 1997, 13(2): 72-75.
Citation: Wu Guo-shi, Wang Zhi-xuan, Tian Hua. Calculation of Presetting Angle in Torsion Bar Spring[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 1997, 13(2): 72-75.

Calculation of Presetting Angle in Torsion Bar Spring

More Information
  • Received Date: September 19, 1996
  • Published Date: June 29, 1997
  • Cylindrical torsion bar spring is principal loading component in spring suspention of wheeled and track-mounted vehicles.Presetting torque is the key process to raise its loading capability.In this paper,torsional residual stress distribution produced by presetting torsion angle were calculated. Although it is useful to raise endurance of torsion bar for reduction of actual service stresses,the presetting torque must cause considerable damage to material.Thus the calculation of optimum presetting torque angle is necessary.
  • Related Articles

    [1]Hu Shupeng, Shang Yehua, Liu Hui, Li You, Zhao Chunjiang, Fu Weiqiang. Comparative test between displacement and four-bar indirect measurement methods for tractor guide wheel angle[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2017, 33(4): 76-82. DOI: 10.11975/j.issn.1002-6819.2017.04.011
    [2]Yu Haisheng, Zhang Tong, Ma Zhitao, Wang Ruiping. Torsional vibration analysis of planetary hybrid electric vehicle driveline[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2013, 29(15): 57-64. DOI: 10.3969/j.issn.1002-6819.2013.15.008
    [3]Zhang Qihua, Xu Yan, Shi Weidong, Gao Xiongfa, Ma Dongqi, Lu Weigang. Design and performance test of circumferential crankle guide vane of multistage centrifugal pumps[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2013, 29(5): 37-43.
    [4]Cheng Shijun, Zong Li, Wan Peng, Xiong Shanbo. Parameter optimization and test of continuous spring brush scaling machine for freshwater fish[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2012, 28(20): 88-94.
    [5]Liu Qingting, Ou Yinggang, Qing Shangle, Cheng Haibo. Failure tests of sugarcane stalks under torsion, compression and tension load[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2006, 22(6): 201-204.
    [6]Jiang Haobin, Zhou Kongkang, Shi Kang, Zhang Jiuru. Computer Aided Parameter Design of Leaf Springs for Agricultural Transporters[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 1999, 15(4): 140-145.
    [7]ZHENG Lian-zhu, ZHANG You-kun, LIU Ming-shu, GE Jian-min. Relationship Between the Tyre Dynamic Parameter and Torsional Vibration in Powertrain[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 1999, 15(3): 49-52.
    [8]Chen Kuifu, Peng Hongtao, Jiao Qunying. The Recursive Transfer Matrix Method to Calculate the Torsional Vibration of Complex Transmission System[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 1999, 15(2): 42-45.
    [9]Gao Xiang, Zhu Maotao, Xia Changgao, Zhang Tieshan. Test Analysis and Calculation of Fatigue Stress of Diaphragm Spring Used in Vehicle Clutches[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 1998, 14(4): 62-66.
    [10]Qiu Meikai. Elastic Characteristic of Disk Spring[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 1994, 10(3): 83-87.

Catalog

    Article views (715) PDF downloads (956) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return