Feature modeling and assembling conjunction design on wheat precision seedmeter

Yang Xin; Liu Junfeng; Feng Xiaojing

Volume 20 Issue 3

May 2004

Turn off MathJax

Article Contents

Abstract

Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE) > 2004 > 20(3): 89-92.

Yang Xin, Liu Junfeng, Feng Xiaojing. Feature modeling and assembling conjunction design on wheat precision seedmeter[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2004, 20(3): 89-92.

Citation:

PDF (219 KB)

Feature modeling and assembling conjunction design on wheat precision seedmeter

More Information

Received Date: October 21, 2003
Revised Date: January 13, 2004
Published Date: May 30, 2004

Graphical Abstract

Abstract

Abstract

This paper presents methods based on parameterized feature modeling and assembling conjunction design on wheat precision seedmeter using three-dimensional feature modeling software Inventor. The technique essentials and keys to the seedmeter modeling and assembling conjunction design process were discussed, and dynamic simulation of assembling process and conjunctional producion of two-dimensional drawing were conducted. The efficiency of remodel-design and series-design was improved, the higher precision of design was insured. And a reference for the design of other mechanisms by Inventor was provided.
- precision seedmeter,
- parameterization,
- feature modeling,
- conjunction design,
- Inventor

FullText(HTML)

References (0)

[1]	LIU Jian, WU Xuyong, WANG Baolong, WU Qingsen, TIAN Libo. Simulation of light environment in a serrated photovoltaic greenhouse and optimization of daylighting roofs based on Design Builder[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2025, 41(7): 211-221. DOI: 10.11975/j.issn.1002-6819.202410056
[2]	Cheng Xiupei, Lu Caiyun, Meng Zhijun, Yu Jiayang. Design and parameter optimization on wheat precision seed meter with combination of pneumatic and type hole[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2018, 34(24): 1-9. DOI: 10.11975/j.issn.1002-6819.2018.24.001
[3]	Mao Wei, Yang Jinzhong, Zhu Yan, Wu Jingwei. Soil salinity process of Hetao Irrigation District after application of well-canal conjunctive irrigation and mulched drip irrigation[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2018, 34(1): 93-101. DOI: 10.11975/j.issn.1002-6819.2018.01.013
[4]	Liu Lijing, Yang Hui. 3D reverse engineering design on seed tube based on Geomagic Design software[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2015, 31(11): 40-45. DOI: 10.11975/j.issn.1002-6819.2015.11.006
[5]	Wang Lihua, Xiao Hui, Xu Shuo, Liu Shu, Du Weili, Huang Qiquan, Wang Yu. Design and implementation of fishery information recommendation system based on association rules[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2013, 29(7): 124-130.
[6]	Zhao Jie, Yu Fang, Tang Minfeng, Du Wenliao. Design and implementation of EtherCAT-based distributed cotton bale inspection and management system[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2013, 29(2): 207-216.
[7]	Yue Weifeng, Yang Jinzhong, Zhan Chesheng. Coupled model for conjunctive use of water resources in the Yellow River irrigation district[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2011, 27(4): 35-40.
[8]	Fuzzy optimization of mechanical outline design scheme based on improved grey connection analysis[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2010, 26(6): 135-140.
[9]	Wang Qi, Zhao Wanhua, Wei Zhengying. Parameterized computer aided design method for drip emitter[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2005, 21(13): 110-112.
[10]	Liu Changrong, Deng Yu, Zheng Yucai, Chen Xiulong, Yan Dongliang. New approach to parameterization virtual manufacturing system for gears[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2003, 19(4): 129-132.